论Eppley PIR精密红外辐射仪的测量精度   总被引：1，自引：0，他引：1  

江灏  沈志宝 《高原气象》1992,(4)

本文依据红外辐射表(PIR)的结构、性能和工作原理讨论了测量精度及有关影响因素,比较了粗测和精测两种方法的特点,在此基础上提出了各测量方法的适用范围和精度范围以及提高测量精度的措施,同时也给出了一些特定场合下的测量实例及提高测量精度的具体方法。分析表明:精测方法具有很好的测量精度以及很强的环境适应性。粗测在限定的温度范围内具有测量简单、换算方便、易于实现自动化等优点,精度尚能满足一般要求,但在限定的温度范围以外,测量精度急剧恶化。在影响测量精度的各因素中以温度响应中表体热辐射测量的影响最大,在粗测方法中表内电池的性能与测量精度关系重大。强烈日射对测量精度有一定影响,经订正后可基本消除。  相似文献   

GPS高程拟合的方式及可靠性分析   总被引：2，自引：1，他引：2  

伍青云 《中国煤田地质》2006,18(3):70-72

在范围不大的区域中，高程异常具有一定的几何相关性，GPS高程拟合就是利用这一原理，求解正常高。在解析法求解过程中，首先用最小二乘法确定拟合数学模型的系数，在此基础上计算出待测点的高程异常值。通过实例验证：GPS高程拟合的精度主要取决于GPS大地高的精度、重合点正常高的精度、重合点的分布及拟模型的选择。一般在重合点数量充足且分布均匀的情况下，GPS高程拟合的精度可达到四等水准网的精度要求。  相似文献   

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China     

CHENChujiang LIDeren ZHUQing 《地球空间信息科学学报》2005,8(1):33-38

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.  相似文献   

GIS中直线元内插点精度及对误差带的影响   总被引：1，自引：0，他引：1  

魏峰远  邰茜 《测绘学院学报》2005,22(3):232-234

基于误差传播定律，考虑参数r误差影响，推导了线元内插点的精度计算公式，讨论内插点精度对线元误差带的影响，并对影响的结果进行了分析，得到了一些有益的结论。  相似文献   

基于点重要度的地形LOD简化算法及精度   总被引：1，自引：0，他引：1  

张寅宝王光霞  王国庆 《测绘学院学报》2005,22(4):281-284

在分析、讨论目前关于3维地形模型简化与误差控制方法的基础上,提出了一种基于点重要度进行连续LOD模型简化的算法.并以5种典型地貌的实验数据作为运行实例,给出了点重要度与地貌类型之间的精度关系.这为今后连续LOD模型的合理建立提供了一种新思路和方法,也为模型的简化提供了科学依据.  相似文献   

Geometry and accuracy of reflecting points in bistatic satellite altimetry     

J. Kostelecký  J. Klokočník  C.A. Wagner 《Journal of Geodesy》2005,79(8):421-430

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.  相似文献   

Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery     

Joanne  Poon  Clive S.  Fraser  Zhang  Chunsun  Zhang  Li  Armin  Gruen 《The Photogrammetric Record》2005,20(110):162-171

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.  相似文献   

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry   总被引：1，自引：0，他引：1  

Clive S.  Fraser  Alex  Woods  Danny  Brizzi 《The Photogrammetric Record》2005,20(111):205-217

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.  相似文献   

单道扫描电感耦合等离子体发射光谱法测定地质样品中的微量稀土元素     

郭振华  张立英  杜百娟 《化工矿产地质》2003,25(1):57-60

采用Na_2O_2熔融矿样,水提取,加三乙醇胺、EGTA做掩蔽剂。经氢型阳离子交换树脂交换分离富集稀土元素,由于选择了合适的仪器条件及测定波长,有效地消除了电感耦合等离子体发射光谱法(ICP-AES)测定过程中的基体干扰和光谱干扰。应用于地质样品中的稀土元素分析,获得了满意的准确度、精密度及检出限。  相似文献   

高精度推求正高的两种方法     

张赤军 《武汉大学学报(信息科学版)》2003,28(4):432-434,443

论述了高精度推求正高的两种方法 ,并对正高精度的推估及其在模型上的试算也作了讨论 ,对于海拔为 5 0 0 0m的高山 ,正高的误差一般不超过± 1 0cm ,这与距青岛水准原点达数千公里的西部高山 (原 )处正常高的精度也比较接近  相似文献